Items where Author is "HASANUZZAMAN, MD."

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Jump to: Article | Other
Number of items: 72.

Article

HASANUZZAMAN, MD. (2016) Tangible effect of Mn on the dielectric properties of Nd doped Bismuth Titanate ceramic. Journal of the Australian ceramic Society, 52 (1). pp. 89-94.

HASANUZZAMAN, MD. (2015) Effects of Various Parameters on PV Module Power and Efficiency. Energy Conversion and Management, 103. 348358.

HASANUZZAMAN, MD. (2015) Impact of renewable energy on rural electrification in Malaysia: a review. Clean Technology and Environmental Policy, 17 (4). 859871.

HASANUZZAMAN, MD. (2015) Leakage Current Paths in PV Transformer-Less Single-Phase Inverter Topology and Its Mitigation through PWM for Switching. International Journal of Power Electronics and Drive Systems, 6 (1). pp. 148-159.

HASANUZZAMAN, MD. (2015) Photovoltaic Power Generation and its Economic and Environmental Future in Bangladesh. Journal of Renewable and Sustainable Energy, 7 (1).

HASANUZZAMAN, MD. (2014) Effect of Cell Material on the performance of PV System. Advance Materials Research, 1043 (III). pp. 12-16.

HASANUZZAMAN, MD. (2014) Global Renewable Energy Based Electricity Generation and Smart Grid System for Energy Security. The Scientific World Journal, 2014. p. 13.

HASANUZZAMAN, MD. (2014) Palm oil EFB: Green Energy Source in Malaysia. Applied Mechanics and Materials, 619. pp. 376-380.

HASANUZZAMAN, MD. (2013) A Review on Performance Improvement of Solar Crystalline Silicon Photovoltaic Cells. International Journal of Renewable Energy Resources, 3 (1). pp. 19-26.

HASANUZZAMAN, MD. (2013) Alternative Energy Resources in Bangladesh and Future Prospect. Renewable & Sustainable Energy Reviews, 25. pp. 698-707.

HASANUZZAMAN, MD. (2013) Effect of Heat-Generating Solid Body on Mixed Convection Flow in a Ventilated Cavity. Heat Transfer Engineering, 34 (15). pp. 1249-1261.

HASANUZZAMAN, MD. (2013) Effects of a Longitudinal Magnetic Field and Discrete Isoflux Heat Source Size on Natural Convection inside a Tilted Sinusoidal Corrugated Enclosure.

HASANUZZAMAN, MD. (2012) A Review of Thermodynamics and Heat Transfer in Solar Refrigeration System. pp. 5639-5648.

HASANUZZAMAN, MD. (2012) An analysis of actual energy savings in an Indian cement Industry through energy efficiency index. pp. 829-840.

HASANUZZAMAN, MD. (2012) An energy flow analysis in a paper-based industry. pp. 905-916.

HASANUZZAMAN, MD. (2012) Analysis of energy and exergy of an annealing furnace. pp. 2156-2162.

HASANUZZAMAN, MD. (2012) Effects of Lewis number on heat and mass transfer in a triangular cavity. 1213-1219..

HASANUZZAMAN, MD. (2012) Energy savings in the combustion based process heating in industrial sector. pp. 4527-4536.

HASANUZZAMAN, MD. (2012) Energy, economic and environmental analysis of the Malaysian industrial compressed-air systems. pp. 195-210.

HASANUZZAMAN, MD. (2012) Evaluation of the effect of nanofluid-based absorbers on direct solar collector. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 55 (21-22). pp. 5899-907.

HASANUZZAMAN, MD. (2012) Finite Element Simulation of MHD Mixed Convection in a Double-Lid Driven Enclosure with a Square Heat-Generating Block. Journal of Heat Transfer- Transactions of the ASME, 134 (June). pp. 1-8.

HASANUZZAMAN, MD. (2012) Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder. Heat Transfer- Asian Research, 41 (4). 339-353 .

HASANUZZAMAN, MD. (2012) Technologies to recover exhaust heat from internal combustion engines. 5649-5659 .

HASANUZZAMAN, MD. (2011) Developing energy performance standard, label and test procedures and impacts analysis for commercial chillers. 175-190 .

HASANUZZAMAN, MD. (2011) Effects of different variables on moisture transfer of household refrigerator-freezer. Energy Education Science and Technology Part A-Energy Science and Research, 27 (2). 401-418 .

HASANUZZAMAN, MD. (2011) Energy savings and emission reduction for rewinding and replacement of industrial motor. ENERGY, 36 (1). pp. 233-240.

HASANUZZAMAN, MD. (2011) Simulation of MHD mixed convection heat transfer enhancement in a double lid-driven obstructed enclosure. pp. 18-30.

HASANUZZAMAN, MD. (2010) A review on compressed air energy use and energy savings. pp. 1135-1153.

HASANUZZAMAN, MD. (2010) A study of energy efficiency, economic and environmental benefits of a cooling tower. 87-94 .

HASANUZZAMAN, MD. (2010) An end-use energy analysis in a Malaysian public hospital. ENERGY, 35 (12). 4780 - 4785 .

HASANUZZAMAN, MD. (2010) Energy use, energy savings and environmental analysis of industrial boilers and compressors. International Journal of Thermal and Environmental Engineering, 1 (1). 29-36 .

HASANUZZAMAN, MD. (2010) Reynolds and prandtl numbers effects on MHD mixed convection in a lid-driven cavity along with joule heating and a centered heat conducting circular block. 163-170 .

HASANUZZAMAN, MD. (2009) Effects of operating variables on heat transfer, energy losses and energy consumption of household refrigerator-freezer during the closed door operation. ENERGY, 34 (2). pp. 196-198.

HASANUZZAMAN, MD. (2009) Overall thermal transfer value of residential buildings in Malaysia. JOURNAL OF APPLIED SCIENCES, 9 (11). pp. 2130-2136.

HASANUZZAMAN, MD. (2008) Analysis of exhaust emissions of natural gas engine by using response surface methodology. JOURNAL OF APPLIED SCIENCES, 8 (19). pp. 3328-3339.

HASANUZZAMAN, MD. (2008) Investigation of energy consumption and energy savings of refrigerator-freezer during open and closed door condition. JOURNAL OF APPLIED SCIENCES, 8 (10). pp. 1822-1831.

HASANUZZAMAN, MD. (2008) Investigation of energy performance and usage behavior of domestic refrigerator freezer using clustering and segmentation. JOURNAL OF APPLIED SCIENCES, 8 (21). 3957-3962 .

HASANUZZAMAN, MD. (2008) Moisture transfer and energy losses of household refrigerator-freezer during the closed door operation. pp. 30-37.

HASANUZZAMAN, MD. (2008) Performance investigation of a solar powered thermoelectric refrigerator. 7-16 .

HASANUZZAMAN, MD. (2007) A comparison of the air pollution of gasoline and CNG driven car for Malaysi. International Journal of Mechanical and Materials Engineering, 2 (2). 130-138 .

HASANUZZAMAN, MD. (2007) An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. 84 ¿ 92 .

HASANUZZAMAN, MD. (2007) Effects of variables on natural convective heat transfer through V-corrugated vertical plates. 109-117 .

HASANUZZAMAN, MD. (2007) Open and closed door moisture transport and corresponding energy consumption in household refrigerator/freezer. Journal of Energy & Environment, 6. 18-27 .

Other

HASANUZZAMAN, MD. (2015) Saving energy through energy audit and implementing solar system. International Conference on Knowledge Transfer.

HASANUZZAMAN, MD. (2014) Bio-ethanol as an alternative fuel from palm empty fruit bunches and environmental benefits. IET.

HASANUZZAMAN, MD. (2014) Concentrated Solar Thermal Based Power Generation. UTeM.

HASANUZZAMAN, MD. (2014) Enhance photovoltaic/thermal system performance by using nanofluid. IET.

HASANUZZAMAN, MD. (2014) Factors affecting the PV based power generation. IET.

HASANUZZAMAN, MD. (2014) Photovoltaic Prospect and Policies in Malaysia. UTeM.

HASANUZZAMAN, MD. (2014) Review on biomass based power generation technologies in Malaysia. UTeM.

HASANUZZAMAN, MD. (2014) Temperature effect of photovoltaic module under partial shading operation condition. IET.

HASANUZZAMAN, MD. (2013) Effect on Insulation of Photovoltaic Thermal Water Collector. UNSPECIFIED.

HASANUZZAMAN, MD. (2013) Technical review on biomass conversion processes into required energy form. UNSPECIFIED.

HASANUZZAMAN, MD. (2013) Thermal performance improvement of solar thermal power generation. UNSPECIFIED.

HASANUZZAMAN, MD. (2012) A review on pewrformance improvement of crystalline silicon cells. UNSPECIFIED.

HASANUZZAMAN, MD. (2010) Analysis of energy savings for rewinding and replacement of industrial motor. UNSPECIFIED.

HASANUZZAMAN, MD. (2010) Energy and environmental analysis in industrial boilers and compressors. UNSPECIFIED.

HASANUZZAMAN, MD. (2010) Energy consumption, energy savings and emission analysis for industrial motors. UNSPECIFIED.

HASANUZZAMAN, MD. (2009) Energy and environmental analysis of electrical motor in Malaysian office buildings. UNSPECIFIED.

HASANUZZAMAN, MD. (2009) Energy and environmental analysis of electrical motor in industrial boilers. UNSPECIFIED.

HASANUZZAMAN, MD. (2008) Analysis of heat transfer of the refrigerator-freezer. UNSPECIFIED.

HASANUZZAMAN, MD. (2008) Effects of variables on energy consumption of household refrigerator-freezer during the open door condition. UNSPECIFIED.

HASANUZZAMAN, MD. (2008) Effects of variables on moisture transfer of household refrigerator-freezer during open door condition. UNSPECIFIED.

HASANUZZAMAN, MD. (2008) Energy performance of windows for residential building in Malaysia. UNSPECIFIED.

HASANUZZAMAN, MD. (2008) Investigation of refrigerator-freezer performance using LPG as alternative to R-134a. UNSPECIFIED.

HASANUZZAMAN, MD. (2008) Photovoltaic solar energy system to operate refrigerator. UNSPECIFIED.

HASANUZZAMAN, MD. (2007) Energy consumption of household refrigerator-freezer during the closed door condition. UNSPECIFIED.

HASANUZZAMAN, MD. (2007) Energy usage and intensity of commercial building in Malaysia. UNSPECIFIED.

HASANUZZAMAN, MD. (2007) Environmental effect due to the energy consumption of refrigerator-freezer. UNSPECIFIED.

HASANUZZAMAN, MD. (2007) Heat transfer of household refrigerator-freezer during the closed door condition. UNSPECIFIED.

HASANUZZAMAN, MD. (2007) Moisture transfer of household refrigerator-freezer during the closed door condition. UNSPECIFIED.

HASANUZZAMAN, MD. (2007) Overall thermal transfer value (OTTV) and electricity use of residential building in Malaysia. UNSPECIFIED.

This list was generated on Fri Nov 24 02:14:21 2017 MYT.