Items where Author is "HASEEB, A.S. MD. ABDUL"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 76.

Article

HASEEB, A.S. MD. ABDUL (2015) Ball Shear Strength and Fracture Modes of Lead- Free Solder Joints Prepared Using Nickel Nanoparticle Doped Flux. Electron. Mater. Lett., 11. pp. 452-456.

HASEEB, A.S. MD. ABDUL (2015) Enhanced ethanol gas sensing properties of SnO2- core/ZnO-shell nanostructures. Sensors , 14 (1). 14586- 14600.

HASEEB, A.S. MD. ABDUL (2015) Growth and characterization of the oxide scales and core/shell nanowires on Ti-6Al-4V particles during thermal oxidation. Ceramics International, 41 (3). 4401- 4409.

HASEEB, A.S. MD. ABDUL (2015) Intermixing reactions in electrodeposited Cu/Sn and Cu/Ni/Sn multilayer interconnects during room temperature and high temperature aging. J Materials Science: Materials in Electronics, 26 (1). pp. 294-299.

HASEEB, A.S. MD. ABDUL (2015) Mechanical properties of interfacial phases between Sn- 3.5 Ag solder and Ni-18 at. % W barrier film by nanoindentation. Soldering & Surface Mount Technology, 27 (2). pp. 90-94.

HASEEB, A.S. MD. ABDUL (2015) Mechanical properties of intermetallic compounds in electrodeposited multilayered thin film at small scale by nanoindentation. Materials Letters, 147. pp. 50-53.

HASEEB, A.S. MD. ABDUL (2015) Reduction of Electromigration Damage in SAC305 Solder Joints by Adding Ni Nanoparticles through Flux Doping. Journal Materials Science, 50. pp. 6748-6756.

HASEEB, A.S. MD. ABDUL (2015) Tailoring ZnO nanostructures by spray pyrolysis and thermal annealing. Ceramics International, 41 (3). pp. 5205-5211.

HASEEB, A.S. MD. ABDUL (2012) Degradation of automotive Materials in Palm Biodiesel.

HASEEB, A.S. MD. ABDUL (2012) Effects of Reflow on the Interfacial Characteristics between Zn Nanoparticles Containing Sn-3.8Ag-0.7Cu Solder and Copper Substrate.

HASEEB, A.S. MD. ABDUL (2012) Fabrication and Properties of Sn-3.5Ag-XCu Solder by Ball Milling and Paste Mixing.

HASEEB, A.S. MD. ABDUL (2012) Gas Sensors Based on One Dimensional Nanostructured Metal-oxides: A Review.

HASEEB, A.S. MD. ABDUL (2012) Nanoindentation and Micro-Mechanical Fracture Toughness of Electrodeposited Nanocrystalline Ni-W.

HASEEB, A.S. MD. ABDUL (2012) Structural and Mechanical Properties of Nanostructured Tungsten Oxide Thin Films.

HASEEB, A.S. MD. ABDUL (2011) Addition of Cobalt Nanoparticles into Sn-3.8Ag- 0.7Cu Lead-Free Solder by Paste Mixing. Soldering & Surface Mount Technology.

HASEEB, A.S. MD. ABDUL (2011) Degradation of physical properties of different elastomers upon exposure to palm biodiesel. Energy.

HASEEB, A.S. MD. ABDUL (2009) Corrosion characteristics of copper and leaded bronze in palm biodiesel.

HASEEB, A.S. MD. ABDUL (2009) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films.

HASEEB, A.S. MD. ABDUL (2009) Influence of substrate temperatures on structural, morphological and optical properties of RF- sputtered anatase TiO2 films.

HASEEB, A.S. MD. ABDUL (2009) Investigation into the Causes of Premature Corrosion of Pre-Fabricated Steel Factory Building. Journal of Mechanical Engineering (The Institution of Engineers, Bangladesh), ME40 (2). pp. 90-94.

HASEEB, A.S. MD. ABDUL (2009) Selective area rare-earth doping of planar glass samples for monolithic integration of optically passive and active waveguides.

HASEEB, A.S. MD. ABDUL (2009) Spreading profile of dopant solution on pre- sintered silica layers for selective area doping of integrated optic planar glass samples. pp. 378-382.

HASEEB, A.S. MD. ABDUL (2009) Structural investigations on nanocrystalline Ni-W alloy films by transmission electron microscopy. pp. 6593-6598.

HASEEB, A.S. MD. ABDUL (2009) Synthesis and Annealing of Nanostructured TiO2 Films by Radio-frequency Magnetron Sputtering. pp. 2815-2821.

HASEEB, A.S. MD. ABDUL (2008) Energy-Efficient Optical Coating for Flat Glass. pp. 1883-1890.

HASEEB, A.S. MD. ABDUL (2008) Friction and Wear Characteristics of Electrodeposited Nanocrystalline Nickel-Tungsten Alloy Films. Wear, 264. pp. 106-112.

HASEEB, A.S. MD. ABDUL (2008) Journal of Chemical and Biomolecular Engineering. Journal of Chemical and Biomolecular Engineering, 1 (2). pp. 93-97.

HASEEB, A.S. MD. ABDUL (2008) LIGA Fabrication of Nanocrystalline Ni-W Alloy Micro Specimens from Ammonia-Citrate Bath. , Microsystem Technologies, 14. pp. 379-388.

HASEEB, A.S. MD. ABDUL (2008) Production and Purification of Zircon Opacifier from Zircon Found in the Coastal Area of Bangladesh.

HASEEB, A.S. MD. ABDUL (2008) Thermal Stability of Electrodeposited LIGA Ni-W Alloys for High Temperature MEMS Applications. pp. 1531-36.

HASEEB, A.S. MD. ABDUL (2007) Wear Behaviour of Al-4.5%Cu-3.4%Fe In-Situ Composite: Effect of Thermal and Mechanical Processing. , Journal of Materials Processing Technology, Vol. 182, pp. 327-332, 2007 (Elsevier), 182. pp. 327-332.

Book Section

HASEEB, A.S. MD. ABDUL (2010) Nanotechnology Institute (ASME). In: Encyclopedia of Nanoscience and Society. Sage Publications, CA, USA,. ISBN 10: 1412969875

Monograph

HASEEB, A.S. MD. ABDUL (2008) A Comparison Study on SnAgNiCo and Sn3.8Ag0.7Cu C5 Lead Free Solder System. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Effect of Biodiesel on Engine Parts. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Effects of annealing treatment on the characteristics of magnetron sputter deposited TiO2 film. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Integration of Technical and Business Issues in a Single Course in a Materials Engineering Curriculum. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Structural andOptical Properties of TiO2 Films Deposited by RF Magnetron Sputtering. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Study on Tribological Performance of Palm Oil Based Biodiesel. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Tailoring Visible Transmittance and Optical Constants in TiO2 Thin Films for Energy-Efficient Glass Coating. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Wear Properties of Jute Fiber Reinforced Polymer Composites. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Fracture Toughness Measurements on Ni-W Alloy Microbeams Fabricated by Lithography and Electrodeposition. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) LIGA-Fabrication of Ni-W Microcomponents for HARMST Applications. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Legierungsabscheidung f r LIGA-Mikroteile und Werkzeugen am Beispiel von Ni-Fe und Ni-W (Ni-Fe and Ni-W Alloy Deposition for LIGA Microparts and Tools. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Metallic Nanocomposites and Nanostructures by an Inexpensive Method: Electrochemical Synthesis. UNSPECIFIED. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Thermal Stability of Electrodeposited LIGA Ni-W Alloys for High Temperature MEMS Applications. UNSPECIFIED. UNSPECIFIED.

Other

HASEEB, A.S. MD. ABDUL (2012) Effects of Layer Thickness and Stacking Sequence of Electrodeposited Sn and Bi Layers on Reflowed SnBi Solder Alloys. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2012) Fabrication of One-dimensional CuO Nanocrystals via Pulsed Wire Explosion: Structural, Optical and Electronic Characterizations. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2012) Interfacial Reactions between Sn-3.8Ag-0.7Cu Solder and Ni-W Alloy Films. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2012) Interfacial Reaction Between Ni-Zn Alloy Films and Lead- free Solders. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2012) Processing and Structure of Metallic Nanoparticle Reinforced Lead Free Solder for Microelectronic Packaging. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2012) Soldering and Interfacial Characteristics of Sn-3.5Ag Solder Containing Zinc Nanoparticles. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2012) Synthesis of Cu Nanocomposites With Various Morphology via Pulsed Wire Evaporation. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Adhesion and wear behavior of nanostructured titanium oxide thin films. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Corrosion Behavior of Copper and Leaded Bronze in Palm Biodiesel. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Effect of Copper Nano Powder Additions to Lead Free Solder. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Effect of Germanium Addition to Sn3.5Ag Lead Free Solder System for Overall BGA Package Robustness Improvement. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Effect of temperature on the tribological performance of palm biodiesel. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Effects of Nickel Nanoparticle Additions on the Properties of Sn-3.8Ag-0.7Cu Lead-Free Solder. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Effects of Sputtering Parameters on the Structural, Morphological and Optical Properties of Tungsten Oxide Thin Films. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Interfacial Reaction of Lead Free Solder with Electroplated Ni and Ni-W alloys Films during Reflow. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Spreading rate and wetting behaviour of Sn-3.8Ag- 0.7Cu lead-free solder with the addition of cobalt nanoparticles. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Structural characterization of nanocrystalline Ni- W alloys by transmission electron microscopy. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2009) Tribochemical Degradation of Phenolic Resin in Automotive Brake Pad during Dry Sliding against Aluminium Metal Matrix Composites. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) A Review on Biodiesel Properties and Its Effect on Automotive Engine. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Effects of Annealing Treatment on Optical Properties of Anatase TiO2 Thin Films. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) RF Reactive Sputter Deposition of TiO2 Films at Different Temperatures: Structural, Optical and Mechanical Properties. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Structural, Optical and Morphological Properties Of TiO2/Ag/TiO2 Multilayer Films. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Structure and Hardness Evolution in Nanocrystalline LIGA Fabricated Ni-12at%W Alloy at 873 K. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Tribological Study of Palm Oil Based Biofuel. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2008) Upgrading Higher Education: Malaysian Experience. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Challenges of Research and Graduate Studies in Engineering at BUET. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Energy Efficient Nano Coatings for Architectural Flat Glass towards Malaysian Low Energy Buildings. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Energy-Efficient Optical Coating for Flat Glass. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Friction and Wear Characteristics of Biodiesel Contaminated Lubricants. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Micro-Fracture Testing of Ni-W Microbeams Produced by Electrodeposition and FIB Machining. UNSPECIFIED.

HASEEB, A.S. MD. ABDUL (2007) Nanoscience and Nanotechnology Research Activities in the University of Malaya,. UNSPECIFIED.

This list was generated on Mon Sep 25 02:08:29 2017 MYT.