Items where Author is "HASSAN, AZIZ BIN"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Jump to: Article | Monograph | Other
Number of items: 85.

Article

HASSAN, AZIZ BIN (2016) Improving the thermal properties of fluoroelastomer (Viton GF-600S) using carbon nanotube, Composite Interfaces, 2016. DOI: 10.1080/09276440.2016.1127668.

HASSAN, AZIZ BIN (2015) Compression and mechanical properties of directly compressible pregelatinized sago starches, Powder Technology, 269(2015)15-21.

HASSAN, AZIZ BIN (2015) Improving the thermal properties of fluoroelastomer (Viton GF-600S) using acidic surface modified carbon nanotube, Polimeros-Ciencia e Tecnologia, 25(4)(2015)392-401.

HASSAN, AZIZ BIN (2015) Microstructural and thermal properties of fluoroelastomer (FE)/acidic surface modified carbon nanotube (MCNT) nanocomposites, Polymer Composites, DOI: 10.1002/pc.23532.

HASSAN, AZIZ BIN (2014) Effects of extrusion temperature on the rheological, dynamic mechanical and tensile properties of kenaf fiber/HDPE composites, Composites, Part B: Engineering, 58(2014)259-266 (Q1).

HASSAN, AZIZ BIN (2014) Improvement in the mechanical performance and interfacial behavior of kenaf fiber reinforced high density polyethylene composites by the addition of maleic anhydride grafted high density polyethylene, Journal of Polymer Research, 21(5)(2014)439.

HASSAN, AZIZ BIN (2014) Microstructural and thermal properties of carbon nanotube/fluoroelastomer composites, Composites, Part B: Engineering, 58(2014)166-174 (Q1).

HASSAN, AZIZ BIN (2013) Effect of lateral substituent on the mesomorphic behavior of schiff base ester containing side chain liquid crystalline polymers, Journal of Polymer Research, 20(2013)296 (Q2).

HASSAN, AZIZ BIN (2013) Impact properties of glass-fiber/polypropylene composites: the influence of fiber loading, specimen geometry and test temperature, Fibers and Polymers, 14(11)(2013)1877-1885 (Q2).

HASSAN, AZIZ BIN (2013) Naphthalene group containing side chain liquid crystalline polymers and their rheological behavior, Journal of Polymer Research, 20(2013)131 (Q2).

HASSAN, AZIZ BIN (2013) Processing, microstructural, thermal and mechanical properties of glass fiber/nanoclay/polypropylene composites, Sains Malaysiana, 42(4)(2013)537-546.

HASSAN, AZIZ BIN (2013) Reactivity ratio determination of newly synthesized copolymers from glycidyl methacrylate and tetrahydrofurfuryl acrylate, Sains Malaysiana, 42(4)(2013)509-514.

HASSAN, AZIZ BIN (2013) Structural and optical characterization of metal tungstates (MWO4; M = Ni, Ba, Bi) synthesized by a sucrose-templated method, Chemistry Central Journal, 7(2013)80 (Q1).

HASSAN, AZIZ BIN (2013) Synthesis and characterisation of biodegradable multiblock copolymers of L-lactide, 949;-caprolactone and poly(ethylene glycol), Scientia Iranica, Transactions C: Chemistry and Chemical Engineering, 20(6)(2013) 1839-1847.

HASSAN, AZIZ BIN (2013) Synthesis and characterization of azo benzothiazole chromophore based liquid crystal macromers: Effects of substituents on benzothiazole ring and terminal group on mesomorphic, thermal and optical properties, Materials Chemistry and Physics, 140(2013)543-552 (Q1).

HASSAN, AZIZ BIN (2013) Thermal conductivity and dynamic mechanical analysis of nickel zinc ferrite nanoparticles filled thermoplastic natural rubber nanocomposite, Composites, Part B: Engineering, 52(2013)334-339 (Q1).

HASSAN, AZIZ BIN (2013) Thermal, optical and electrochemical study of side chain liquid crystalline polymers bearing azo-benzothiazole chromophore in the mesogen, Journal of Polymer Research, 20(2013)259 (Q2).

HASSAN, AZIZ BIN (2012) Micro-structural, thermal and mechanical properties of injection moulded glass-fiber/nanoclay/polypropylene composites, Journal of Reinforced Plastics and Composites, 31(4)(2012)269-281.

HASSAN, AZIZ BIN (2012) Moisture absorption effect on thermal, dynamic mechanical and mechanical properties of injection-molded short glass-fiber/polyamide 6,6 composites, Fibers and Polymers, 13(7)(2012)899-906.

HASSAN, AZIZ BIN (2012) Study of thermal decomposition kinetics of palm oleic acid-based alkyds and effect of oil length on thermal stability, Journal of Polymers and the Environment, 20(2)(2012)507-513.

HASSAN, AZIZ BIN (2012) Synthesis and characterization of new copolymers from glycidyl methacrylate and tetrahydrofurfuryl acrylate: Determination of reactivity ratios, Fibers and Polymers, 13(5)(2012)555-563.

HASSAN, AZIZ BIN (2012) Thermal and mechanical properties of treated and untreated Red Balau (Shorea Dipterocarpaceae)/LDPE composites, Journal of Reinforced Plastics and Composites, 31(2012)215-224.

HASSAN, AZIZ BIN (2011) Effect of acid modification on dyeing properties of rajshahi silk fabric with different dye classes, Fibers and Polymers, 12(5)(2011)642-647.

HASSAN, AZIZ BIN (2011) Extrusion and injection-molding of glass- fiber/MAPP/polypropylene: Effect of coupling agent on DSC, DMA and mechanical properties, Journal of Reinforced Plastics and Composites, 30 (14)(2011)1223-1232.

HASSAN, AZIZ BIN (2011) Fibre length, thermal, mechanical and dynamic mechanical properties of injection-moulded glass- fibre/polyamide 6,6: Plasticisation effect, Journal of Reinforced Plastics and Composites, 30 (6)(2011)488-498.

HASSAN, AZIZ BIN (2011) Impact properties of injection moulded glass fibre/polyamide 6,6 composites: Effect of testing parameters, Journal of Reinforced Plastics and Composites, 30(10)(2011)889-898.

HASSAN, AZIZ BIN (2011) Interfacial shear strength and tensile properties of injection-molded, short- and long-glass fiber reinforced polyamide 6,6; Journal of Reinforced Plastics and Composites, 30(14)(2011)1233-1242.

HASSAN, AZIZ BIN (2011) Plasticisation effect on thermal, dynamic mechanical and tensile properties of injection- moulded glass-fibre/polyamide 6,6, Journal of Science and Technology, 3(1)(2011)47-66.

HASSAN, AZIZ BIN (2011) Preparation and characterisation of tungstate scheelite structured nanoparticles, Materials Research Innovations, 15(S2)(2011)97-100.

HASSAN, AZIZ BIN (2011) Reactions between epoxidized natural rubber and palm oil-based alkyds at ambient temperature, Journal of Applied Polymer Science, 120(3)(2011) 1503-1509.

HASSAN, AZIZ BIN (2011) Thermal and tensile properties of treated and untreated Red Balau (Shorea Dipterocarpaceae) filled LDPE composites, Journal of Science and Technology, 3(2)(2011)17-28.

HASSAN, AZIZ BIN (2010) Reactions of palm oil-based mcl-PHAs with epoxidized natural rubber, Journal of Applied Polymer Science, 115(4)(2010)2039-2043.

HASSAN, AZIZ BIN (2009) Modifications of natural rubber and epoxidised natural rubber compounds by palm oil-based alkyds, Malaysian Rubber Technology Developments, 9(1)(2009)11-14.

HASSAN, AZIZ BIN (2008) Delamination and void analysis on die attach epoxy of a QFN package, Solid State Science and Technology, 16 (2)(2008)207-213.

HASSAN, AZIZ BIN (2007) Synthesis and characterization of random biodegradable copolymers of L-Lactide, Glycolide and Trimethylene carbonate, Iranian Polymer Journal, 16(7)(2007)489-494.

HASSAN, AZIZ BIN (2007) The influence of temperature and reaction time in the degradation of natural rubber latex, The Malaysian Journal of Analytical Sciences, 11(1) (2007)42-47.

HASSAN, AZIZ BIN (2006) A new cementing approach to improve and provide long-term zonal isolation, Proceedings of SPE Asia Pacific Oil and Gas Conference and Exhibition 2006: Thriving on Volatility, 1(2006) 52-65.

HASSAN, AZIZ BIN (2006) Special cement system and cementing techniques improve zonal isolation in South Oman fields, Proceeding of SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 3(2006)1920-1931.

HASSAN, AZIZ BIN (2006) Structural studies of potassium hexatitanates prepared under hydrothermal and solid state conditions, Functional Materials and Devices, 517 (2006)222-226.

HASSAN, AZIZ BIN (2004) Gamma rays vulcanization of dried film natural rubber latex: effect of different radiation doses and sensitizers on its tensile property, Jurnal Sains, 12(1&2)(2004)26-31.

HASSAN, AZIZ BIN (2004) Hydrogen production from methanol using potassium hexatitanate promoted ruthenium oxide catalysts, International Journal of Chemical Sciences, 2(4) (2004)519-526.

HASSAN, AZIZ BIN (2004) Tensile, impact and fiber length properties of injection molded, short and long glass fiber composites, Journal of Reinforced Plastics and Composites, 23(9)(2004)969-986, DOI: 10.1177/0731684404033960. Journal of Reinforced Plastics and Composites.

HASSAN, AZIZ BIN (2003) Extrusion- and pultrusion-compounded carbon fibre reinforced polyamide 6,6 composites: Impact properties of injection moulded specimens, Malaysian Journal of Science, 23(2003)105-110.

HASSAN, AZIZ BIN (2003) Structure-property relationship of injection moulded carbon fibre reinforced polyamide 6,6 composites: The effect of compounding routes, Polymer Testing, 22(2)(2003)185-189; DOI: 10.1016/S0142-9418(02)00068-5.

HASSAN, AZIZ BIN (2001) Short- and long-glass fibre reinforced polyamide 6,6 composites: Fibre length characteristics of injection moulded specimens, Malaysian Journal of Science, 20(2001)57-63.

HASSAN, AZIZ BIN (2001) Short- and long-glass fibre reinforced polyamide 6,6 composites: Tensile properties of injection moulded specimens, Malaysian Journal of Science, 20(2001)51-55.

HASSAN, AZIZ BIN (2001) The effect of impeller design on the mixing of non-newtonian internal tyre lubricant, Journal of Industrial Technology, 10(1)(2001)105-113.

HASSAN, AZIZ BIN (1994) Interactions and partitioning of diluents/plasticizers in hydroxypropyl methylcellulose and poly(vinyl alcohol) homopolymers and blends. Part II: Glycerol, Colloid and Polymer Science, 272(1)(1994)48-56.

HASSAN, AZIZ BIN (1994) Interactions and partitioning of diluents/plasticizers in hydroxypropyl methylcellulose and poly(vinyl alcohol) homopolymers and blends. Part III: Polyethylene glycol 400, Colloid and Polymer Science, 272(2) (1994)220-227.

HASSAN, AZIZ BIN (1994) Plasticization and interactions of polyethylene glycol 6000 with hydroxypropyl methyl cellulose/polyvinyl alcohol blends, International Journal of Pharmaceutics, 102(1-3)(1994)207-211.

HASSAN, AZIZ BIN (1993) Interactions and partitioning of diluents/plasticizers in hydroxypropyl methyl cellulose and poly(vinyl alcohol) homopolymers and blends. Part I: Diethylene glycol, Colloid and Polymer Science, 271(11)(1993)1083-1090.

HASSAN, AZIZ BIN (1993) Phase separation and polymer interactions in aqueous poly(vinyl alcohol)/hydroxypropyl methylcellulose blends, Polymer, 34(6)(1993)1240- 1248. Polymer, 34 (6). pp. 1240-1248.

HASSAN, AZIZ BIN (1993) Plasticization of aqueous poly(vinyl alcohol) and hydroxypropylmethyl cellulose with polyethylene glycols and glycerol, European Polymer Journal, 29 (7)(1993)937-943.

Monograph

HASSAN, AZIZ BIN (2011) Fibre length, thermal, mechanical and dynamic mechanical properties of injection-moulded glass-fibre/polyamide 6,6: Effect of moisture absorption. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2011) The effect of specimen geometry and testing conditions on impact proerties of injection moulded glass fibre/polyamide 6 composites. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2009) Conditioning effect on tensile and flexural properties of injection moulded short glass fibre reinforced polyamide 6, 6 composites. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2009) Impact and dynamic mechanical properties of injection moulded short glass fibre reinforced polyamide 6 composites subjected to different environmental condition. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2007) Extrusion and pultrusion compounded glass fiber reinforced polyamide 6,6 composites : Mechanical- and fiber length-properties of injection molded specimens. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2007) Physical and tensile properties of polyamide 6,6 reinforced with recyclate of glass fibre reinforced thermoset composites. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2006) Comparison of molecular weight determination of low molecular weight natural rubber products using various techniques. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2006) Effect of various reaction times on the degradation of natural rubber latex using sodium nitrite. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2006) Temperature variations in the degradation of natural rubber latex. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2006) Terminated-hydroxyl group of natural rubber in presence of reducing agent. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2005) Characterisation of Polymer/Polymer/Plasticiser Compatibility Using Dynamic Mechanical Analysis. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2005) Structural studies of potassium hexatitanates prepared under hydrothermal and solid state conditions. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2004) Tensile properties and fibre length characteristics of injection moulded glass fibre reinforced polyamide 6,6 composites. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (2003) The properties of injection molded glass fiber reinforced thermoplastic composites: the effect of compounding techniques. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (1997) Fibre degradation of injection moulded short and long glass fibre reinforced thermoplastic composites. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (1997) The advantage of pultrusion over extrusion in the compounding of carbon fibre reinforced polyamide 6,6 composites. UNSPECIFIED. UNSPECIFIED.

HASSAN, AZIZ BIN (1997) The use of torsional braid analyser in the characterisation of polymer blends compatibility. UNSPECIFIED. UNSPECIFIED.

Other

HASSAN, AZIZ BIN (2012) Effects of MAPE content on the mechanical properties of Red Balau (Shorea Dipterocarpaceae)/LDPE composites. UNSPECIFIED.

HASSAN, AZIZ BIN (2012) Effects of extrusion parameters on the dynamic mechanical properties of kenaf fibre/HDPE composites. UNSPECIFIED.

HASSAN, AZIZ BIN (2012) Extrusion and injection-molding of glass- fiber/MAPP/polypropylene: Effect of coupling agent on DSC, DMA and mechanical properties. UNSPECIFIED.

HASSAN, AZIZ BIN (2012) Glass fiber and nanoclay reinforced polypropylene composites: A study of the morphological, thermal and dynamic mechanical behaviors. UNSPECIFIED.

HASSAN, AZIZ BIN (2012) Thermal and mechanical properties of injection moulded aramid/carbon hybrid fibres reinforced polypropylene composites. UNSPECIFIED.

HASSAN, AZIZ BIN (2011) Conditioning effect on thermal and impact properties of injection moulded glass fibre/polyamide 6,6 composites. UNSPECIFIED.

HASSAN, AZIZ BIN (2011) Improving thermal properties of Viton GF-600S with Advanced Polymer Architecture (APA) using carbon nanotube. UNSPECIFIED.

HASSAN, AZIZ BIN (2011) Processing, micro-structural, thermal and mechanical properties of glass fiber/nanoclay/polypropylene composites. UNSPECIFIED.

HASSAN, AZIZ BIN (2011) Rheological properties of extruded kenaf fibre/High density polyethylene composites. UNSPECIFIED.

HASSAN, AZIZ BIN (2011) Water absorption effect on the mechanical properties of heat treated red balau saw dust/LDPE composites. UNSPECIFIED.

HASSAN, AZIZ BIN (2010) Thermal and tensile properties of treated and untreated Red Balau (Shorea Dipterocarpaceae)/LDPE composites. UNSPECIFIED.

HASSAN, AZIZ BIN (2010) Water Plasticisation Effects on Thermal and Tensile Properties of Glass Fiber/Polyamide 6,6 Composites. UNSPECIFIED.

HASSAN, AZIZ BIN (2006) A New Cementing Approach to Improve and Provide Long- Term Zonal Isolation. UNSPECIFIED.

HASSAN, AZIZ BIN (2006) Special Cement System And Cementing Techniques Improve Zonal Isolation In South Oman Fields. UNSPECIFIED.

HASSAN, AZIZ BIN (2001) The properties of injection moulded glass fibre reinforced polyamide 6,6 compsoites. UNSPECIFIED.

This list was generated on Wed Sep 20 02:01:56 2017 MYT.