Items where Author is "HUDA, ZAINUL"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 45.

Article

HUDA, ZAINUL (2009) A comparative analysis of tensile and impact- toughness behavior of cold-worked and annealed 7075 aluminum alloy. International Journal of Impact Engineering (ISI Journal).

HUDA, ZAINUL (2009) Characterization of 2024-T3: An Aerospace Aluminum Alloy. Materials Chemistry and Physics (Impact Factor: 1.87), 113. pp. 515-517.

HUDA, ZAINUL (2009) Effects of Cold Rolling on Bending and Tensile Behavior of 7075 Aluminum Alloy. pp. 3888-3893.

HUDA, ZAINUL (2009) Effects of Degrees of Cold Working and Recrystallization on the Microstructure and Hardness of Commercial-Purity Aluminum. European Journal of Scientific Research (ISSN 1450-216X), 26 (4). pp. 549-557.

HUDA, ZAINUL (2009) Failure Analysis of a Steel Motor-Cycle Kick- Stand. Journal of Failure Analysis and Prevention.

HUDA, ZAINUL (2009) Failure of a Car¿s Drive-Shaft under Torsion. Materials Technology.

HUDA, ZAINUL (2009) Metallurgical Failure Analysis for a Blade Failed in a Gas-Turbine Engine of a Power Plant. Materials and Design (Impact Factor: 1.028), Elsevier Science Publications.

HUDA, ZAINUL (2009) Microstructural control through heat treatment process in an aerospace aluminum alloy. TMS Annual Meeting.

HUDA, ZAINUL (2009) Numerical and Experimental Vibration Analysis for Fatigue Failure Investigation in a Vertical Axis Pump Station. IMECS-2009: International Multiconference of Engineers and Computer Scientists. pp. 1740-1750.

HUDA, ZAINUL (2009) Precipitation Strengthening and Age Hardening in 2017 Aluminum Alloy for Aerospace Application.

HUDA, ZAINUL (2009) Temperature Effects on Material Behavior of Aerospace Aluminum Alloys for Subsonic and Supersonic Aircrafts. Journal of Aerospace Engineering.

HUDA, ZAINUL (2007) Development of Heat Treatment Process for a P/M Superalloy for Turbine Blades. M A R G I N: life & letters in early Australia, 28 (5). pp. 1664-1667.

HUDA, ZAINUL (2006) Mechanism of Grain Growth in an Aerospace Aluminum Alloy. Journal of industrial Technology, 15 (2). pp. 127-136.

HUDA, ZAINUL (2005) Reengineering of Heat-Treatment System for Axle- Shafts of Racing Car. pp. 561-565.

HUDA, ZAINUL (2004) Influence of Particle Mechanisms on the Kinetics of Grain Growth in a P/M Superalloy. Materials Science Forum. pp. 985-990.

HUDA, ZAINUL (1999) A Productive Organization Structure for a Manufacturing Business. Pakistan Business Reviews, 1 (3). pp. 71-78.

HUDA, ZAINUL (1996) THE ENGINEER.

HUDA, ZAINUL (1995) Development of Design Principles for a Creep- Limited Alloy for Turbine Blades. Journal of Materials Engineering and Performance; ASM International, 4 (1). pp. 48-53.

HUDA, ZAINUL (1992) Effect of Solutes and Second-Phase Particles on Grain Growth. pp. 129-140.

HUDA, ZAINUL (1992) Grain Growth in a Powder-Formed Nickel-Base Superalloy. Metal Abstracts, 25.

HUDA, ZAINUL (1991) Kinetics of grain growth in a Ni-base Superalloy. p. 73.

HUDA, ZAINUL (1990) Grain Growth and Gamma-Prime Particles in P/M Superalloy. Practical Metallography, 27. pp. 64-74.

HUDA, ZAINUL (1990) Kinetics of Grain Growth in P/M IN-792 Superalloy\". pp. 211-220.

Book Section

HUDA, ZAINUL (2007) Computation of Critical %Deformation and its Effects on the Microstructure and Hardness of Commercial Purity Aluminum. In: MEMS TECHNOLOGY AND DEVICES¿. Pan Stanford Publishing, Singapore, pp. 385-391. ISBN 13 978-981-270-960-8

HUDA, ZAINUL (2007) Influence of Cold Rolling and Recrystallisation on the Microstructure and Hardness of Aluminum Plate. In: LIGHT METALS in TRANSPORT APPLICATIONS. Canadian Institute of Mining, Metallurgy and Petroleum, Canada, pp. 277-284. ISBN 1-894475-70-4

HUDA, ZAINUL (2004) Influence of Particle Mechanisms on the Kinetics of Grain Growth in a P/M Superalloy. In: RECRYSTALIZATION AND GRAIN GROWTH. Trans Tech Publications, Switzerland, pp. 985-990. ISBN 0-87849-952-0

HUDA, ZAINUL (1999) Microstructural Control in Forged-Hardened Tempered 1050 Steel for Front-Wheel Hub for Motor Cars. In: ADVANCED MATERIALS-99. Dr. A.Q. Khan Research Laboratories, Kahuta, Pakistan, pp. 287-289. ISBN 969-8122-11-7

HUDA, ZAINUL (1996) Influence of Phase Transformation on the Kinetics of Grain Growth in P/M IN-792 Superalloy. In: PHASE TRANSFORMATIONS-96. Dr. A.Q. Khan Research Laboratories, Kahuta, Pakistan, pp. 24-30. ISBN 969-8122-05-2

Book

HUDA, ZAINUL (2009) Design Against Fracture and Failure (In Preparation). Trans Tech Publications, Switzerland.

Other

HUDA, ZAINUL (2009) Designing Materials Against Wear for Orthopedic Bioengineering Systems. UNSPECIFIED.

HUDA, ZAINUL (2009) Effects of % Cold Rolling and Recrystallization on the Microstructure and Hardness of Commercial-Purity Aluminum. UNSPECIFIED.

HUDA, ZAINUL (2009) Metallurgical Failure Analysis of Steel Equal-Tee Joints. Organizer ISAM-2009.

HUDA, ZAINUL (2008) A review of temperature effects on the Strength of aerospace aluminum alloys. UNSPECIFIED.

HUDA, ZAINUL (2008) Availability Hardening Rules in cyclic plasticity by using yield surface. UNSPECIFIED.

HUDA, ZAINUL (2008) Effects on Material Behavior of 2024-T3 Aerospace Aluminum Alloy. UNSPECIFIED.

HUDA, ZAINUL (2008) Fatigue Analysis of Turning Gear Shaft of Steam Turbine by Finite Analysis Method (FEM). UNSPECIFIED.

HUDA, ZAINUL (2008) Recent Developments in Techniques for Inspecting Thermal Barrier Coating (TBC) on Turbine Blades. UNSPECIFIED.

HUDA, ZAINUL (2008) Thermo-Elastic Analysis of Melting Steel Carrier Ladle by Finite Element Method. UNSPECIFIED.

HUDA, ZAINUL (2007) Influence of Cold Rolling and Recrystallisation on the Microstructure and Hardness of Aluminum Plate. UNSPECIFIED.

HUDA, ZAINUL (2005) Application of Product Design Principles to the Manufacture of a Low-Cost Metallographic Grinder. UNSPECIFIED.

HUDA, ZAINUL (2005) MIcrostructural Control in a P/M Superalloy for Application in Turbine Blades. UNSPECIFIED.

HUDA, ZAINUL (2003) Analysis of Metallurgical Failure in A-247 Grey-Iron Brake Disc. UNSPECIFIED.

HUDA, ZAINUL (2001) Development of a new Advanced Material for Aerospace Application. UNSPECIFIED.

HUDA, ZAINUL (1996) DAWN, Karachi. UNSPECIFIED.

HUDA, ZAINUL (1993) Creep Fracture Prevention in a Powder-Metallurgy Superalloy\". Institution of Engineers Pkaistan.

This list was generated on Wed Sep 20 02:05:18 2017 MYT.