Items where Author is "KALAM, MD. ABUL"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 167.

Article

KALAM, MD. ABUL (2016) Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester. Tribology International, 93.

KALAM, MD. ABUL (2015) A comprehensive review on biodiesel cold flow properties and oxidation stability along with their improvement processes. Rsc Advances, 5.

KALAM, MD. ABUL (2015) A comprehensive review on the assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends. Rsc Advances, 5.

KALAM, MD. ABUL (2015) An updated overview of diamond-like carbon coating in tribology. Critical Reviews in Solid State and Materials Sciences, 40.

KALAM, MD. ABUL (2015) Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from Aphanamixis polystachya oil of Bangladesh. Energy Conversion and Management, 91.

KALAM, MD. ABUL (2015) Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends. Rsc Advances, 5.

KALAM, MD. ABUL (2015) Comparative assessment of performance, emissions and combustion characteristics of gasoline/diesel and gasoline/biodiesel in a dual-fuel engine. Rsc Advances, 5.

KALAM, MD. ABUL (2015) Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants. Rsc Advances, 5.

KALAM, MD. ABUL (2015) Effect of Lubricant Formulations on the Tribological Performance of Self-Mated Doped DLC Contacts: a review. Tribology Letters, 58.

KALAM, MD. ABUL (2015) Effect of alcohol-gasoline blends optimization on fuel properties, performance and emissions of a SI engine. Journal of Cleaner Production, 86.

KALAM, MD. ABUL (2015) Effect of injection timing and EGR on engine-out-responses of a common-rail diesel engine fueled with neat biodiesel. Rsc Advances, 5.

KALAM, MD. ABUL (2015) Effects of Palm-Coconut Biodiesel Blends on the Performance and Emission of a Single-Cylinder Diesel Engine. Energy Fuels, 29.

KALAM, MD. ABUL (2015) Energy scenario and biofuel policies and targets in ASEAN countries. Renewable Sustainable Energy Reviews, 46.

KALAM, MD. ABUL (2015) Evaluation of a novel biofuel from unwanted waste and its impact on engine performance, emissions, and combustion characteristics in a diesel engine. Rsc Advances, 5.

KALAM, MD. ABUL (2015) Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion and Management, 90.

KALAM, MD. ABUL (2015) Friction and wear characteristics of Calophyllum inophyllum biodiesel. Industrial Crops and Products, 76.

KALAM, MD. ABUL (2015) Implementation of palm biodiesel based on economic aspects, performance, emission, and wear characteristics. Energy Conversion and Management, 105.

KALAM, MD. ABUL (2015) Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles. Tribology International, 88.

KALAM, MD. ABUL (2015) Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend. Energy Conversion and Management, 94.

KALAM, MD. ABUL (2015) Influence of gas-to-liquid (GTL) fuel in the blends of Calophyllum inophyllum biodiesel and diesel: An analysis of combustion-performance-emission characteristics. Energy Conversion and Management, 97.

KALAM, MD. ABUL (2015) Influence of gas-to-liquid (GTL) fuel in the combined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters. Rsc Advances, 5.

KALAM, MD. ABUL (2015) Oil filter modification for biodiesel-fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction. Energy Conversion and Management, 91.

KALAM, MD. ABUL (2015) Particulate matter, carbon emissions and elemental compositions from a diesel engine exhaust fuelled with diesel-biodiesel blends. Atmospheric Environment, 120.

KALAM, MD. ABUL (2015) Potential of biodiesel as a renewable energy source in Bangladesh. Renewable Sustainable Energy Reviews, 50.

KALAM, MD. ABUL (2015) Stability of biodiesel, its improvement and the effect of antioxidant treated blends on engine performance and emission. Rsc Advances, 5.

KALAM, MD. ABUL (2015) Tailoring fuel properties using jatropha, palm and coconut biodiesel to improve CI engine performance and emission characteristics. Journal of Cleaner Production, 101.

KALAM, MD. ABUL (2015) Tribological Characteristics of Calophyllum inophyllum-Based TMP (Trimethylolpropane) Ester as Energy-Saving and Biodegradable Lubricant. Tribology Transactions, 58.

KALAM, MD. ABUL (2015) Tribological Study of a Tetrahedral Diamond-Like Carbon Coating under Vegetable Oil-Based Lubricated Condition. Tribology Transactions, 58.

KALAM, MD. ABUL (2014) An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine. Energy, 69.

KALAM, MD. ABUL (2014) Assessing idling effects on a compression ignition engine fueled with Jatropha and Palm biodiesel blends. Renewable Energy, 68.

KALAM, MD. ABUL (2014) Assessment of emission and performance of compression ignition engine with varying injection timing. Renewable Sustainable Energy Reviews, 35.

KALAM, MD. ABUL (2014) Biodiesel production, characterization, engine performance, and emission characteristics of Malaysian Alexandrian laurel oil. Rsc Advances, 4.

KALAM, MD. ABUL (2014) Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine. Industrial Crops and Products, 53.

KALAM, MD. ABUL (2014) Effect of Croton megalocarpus, Calophyllum inophyllum, Moringa oleifera, palm and coconut biodiesel-diesel blending on their physico-chemical properties. Industrial Crops and Products, 60.

KALAM, MD. ABUL (2014) Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends. Energy Conversion and Management, 79.

KALAM, MD. ABUL (2014) Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks. Renewable Sustainable Energy Reviews, 30.

KALAM, MD. ABUL (2014) Effect of idling on fuel consumption and emissions fueled by Jatropha biodiesel blends of a diesel engine. Journal of Cleaner Production, 69.

KALAM, MD. ABUL (2014) Effect of synthetic antioxidants on storage stability of Calophyllum inophyllum biodiesel. Materials Research Innovations, 18.

KALAM, MD. ABUL (2014) Effects of Jatropha biodiesel on the performance, emissions, and combustion of a converted common-rail diesel engine. Rsc Advances, 4.

KALAM, MD. ABUL (2014) Engine combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel. Renewable Sustainable Energy Reviews, 30.

KALAM, MD. ABUL (2014) Evaluation of rice bran, sesame and moringa oils as feasible sources of biodiesel and the effect of blending on their physicochemical properties. Rsc Advances, 4.

KALAM, MD. ABUL (2014) Experimental Investigation of a Multicylinder Unmodified Diesel Engine Performance, Emission, and Heat Loss Characteristics Using Different Biodiesel Blends: Rollout of B10 in Malaysia. Scientific World Journal.

KALAM, MD. ABUL (2014) Experimental investigation of performance and regulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors. Energy Conversion and Management, 83.

KALAM, MD. ABUL (2014) Feasibility of diesel-biodiesel-ethanol/bioethanol blend as existing CI engine fuel: An assessment of properties, material compatibility, safety and combustion. Renewable Sustainable Energy Reviews, 32.

KALAM, MD. ABUL (2014) Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review. Energy Conversion and Management, 80.

KALAM, MD. ABUL (2014) Impact of oxygenated additives to palm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine. Energy Conversion and Management, 83.

KALAM, MD. ABUL (2014) Impacts of NOx reducing antioxidant additive on performance and emissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends. Energy Conversion and Management, 77.

KALAM, MD. ABUL (2014) Performance and emission analysis of Jatropha curcas and Moringa oleifera methyl ester fuel blends in a multi-cylinder diesel engine. Journal of Cleaner Production, 65.

KALAM, MD. ABUL (2014) Performance and emission analysis of a multi cylinder gasoline engine operating at different alcohol-gasoline blends. Rsc Advances, 4.

KALAM, MD. ABUL (2014) Performance and emission characteristics of a CI engine fueled with Cocos nucifera and Jatropha curcas B20 blends accompanying antioxidants. Industrial Crops and Products, 57.

KALAM, MD. ABUL (2014) Performance, emissions, and heat losses of palm and jatropha biodiesel blends in a diesel engine. Industrial Crops and Products, 59.

KALAM, MD. ABUL (2014) Production and comparison of fuel properties, engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: A review. Energy Conversion and Management, 80.

KALAM, MD. ABUL (2014) Production of palm and jatropha based biodiesel and investigation of palm-jatropha combined blend properties, performance, exhaust emission and noise in an unmodified diesel engine. Journal of Cleaner Production, 65.

KALAM, MD. ABUL (2014) Properties and use of Moringa oleifera biodiesel and diesel fuel blends in a multi-cylinder diesel engine. Energy Conversion and Management, 82.

KALAM, MD. ABUL (2014) Study of the Effect of Storage Time on the Oxidation and Thermal Stability of Various Biodiesels and Their Blends. Energy Fuels, 28.

KALAM, MD. ABUL (2014) The Effect of Temperature on Tribological Properties of Chemically Modified Bio-Based Lubricant. Tribology Transactions, 57.

KALAM, MD. ABUL (2014) The prospects of biolubricants as alternatives in automotive applications. Renewable Sustainable Energy Reviews, 33.

KALAM, MD. ABUL (2014) Transient simulation of coolant peak temperature due to prolonged fan and/or water pump operation after the vehicle is keyed-off. Heat and Mass Transfer, 50.

KALAM, MD. ABUL (2014) Tribological characteristics of amorphous hydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil. Surface Coatings Technology, 245.

KALAM, MD. ABUL (2013) An Overview of Biofuel as a Renewable Energy Source: Development and Challenges.

KALAM, MD. ABUL (2013) Comparative tribological investigation of bio-lubricant formulated from a non-edible oil source (Jatropha oil).

KALAM, MD. ABUL (2013) Effect of Coconut Biodiesel Blended Fuels on Engine Performance and Emission Characteristics.

KALAM, MD. ABUL (2013) Effect of ethanol gasoline blend on NOx emission in SI engine.

KALAM, MD. ABUL (2013) Energy balance of internal combustion engines using alternative fuels.

KALAM, MD. ABUL (2013) Experimental Investigation into Tribological Characteristics of Bio-Lubricant Formulated from Jatropha Oil.

KALAM, MD. ABUL (2013) Impact of idling on fuel consumption and exhaust emissions and available idle-reduction technologies for diesel vehicles  A review.

KALAM, MD. ABUL (2013) Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions.

KALAM, MD. ABUL (2013) Liquid absorption and solid adsorption system for household, industrial and automobile applications.

KALAM, MD. ABUL (2013) State of the art of NOx mitigation technologies and their effect on the performance and emission characteristics of biodiesel-fueled Compression Ignition engines.

KALAM, MD. ABUL (2012) Impact of coconut oil blends on particulate-phase PAHs and regulated emissions.

KALAM, MD. ABUL (2011) An experimental investigation of high performance natural gas engine with direct injection.

KALAM, MD. ABUL (2011) Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts,.

KALAM, MD. ABUL (2009) Development and Test of a New Catalytic Converter for Natural Gas Fueled Engine. Internationa journal of Sadhana.

KALAM, MD. ABUL (2009) Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia.

KALAM, MD. ABUL (2009) Experimental Test of a New Compressed Natural Gas Engine With Direct Injection.

KALAM, MD. ABUL (2009) The Use of Dihydroxy Fatty Acid and Palm-Based Polyol as Selected Components of Envo-Diesel Fuel Blends to Reduce C.I. Engine Gaseous Emissions and Carbon Deposits. SAE Paper.

KALAM, MD. ABUL (2008) A comparison of the air pollution of gasoline and CNG driven car for Malaysia. pp. 130-138.

KALAM, MD. ABUL (2006) An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle. International Journal of Fuel, 85. 717-724 .

KALAM, MD. ABUL (2006) Evaluation of exhaust emissions reduction of a retrofitted bi-fuel spark ignition engine. Journal of Energy and Environment, 5. pp. 101-111.

KALAM, MD. ABUL (2006) Experimental Evaluation of an Unmodified Diesel Engine using Biodiesel with Fuel Additive.

KALAM, MD. ABUL (2005) A Comparative Evaluation of the Performance of a Gasoline and CNG Fuelled Retrofitted Spark Ignition Car Engine. pp. 11-22.

KALAM, MD. ABUL (2005) CO,HC and NOx Emissions Characteristics of a Retrofitted Bi-Fuel Natural Gas Engine. Hong Kong Transaction, 12 (3). pp. 25-30.

KALAM, MD. ABUL (2005) Development Of Co-Relation Between Vehicle And Stationary Dynamometer-Engine Emissions.

KALAM, MD. ABUL (2005) Effect of coconut oil blended fuels on diesel engines wear and lubrication. Journal of Lubrication science, 17. pp. 389-402.

KALAM, MD. ABUL (2005) Recent development on biodiesel in Malaysia. Journal of scientific & industrial research, 64. 920-927 .

KALAM, MD. ABUL (2005) Retrofitted Engine Performance Comparison and Focus On New CNG/DI Engine. pp. 75-80.

KALAM, MD. ABUL (2005) Retrofitted engine performance and emissions comparison with gasoline and natural gas fuel. pp. 61-70.

KALAM, MD. ABUL (2004) Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil. Journal biomass & bioenergy, 27 (3). pp. 289-297.

KALAM, MD. ABUL (2003) Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine component wear. Journal of Lubrication Science, France, 16 (1). pp. 57-65.

KALAM, MD. ABUL (2003) Engine Test Cell Characteristics for the Development of a New CNG/DI Engine. pp. 11-25.

KALAM, MD. ABUL (2003) Exhaust emission and combustion evaluation of coconut oil-powered indirect injection diesel engine. Journal of renewable energy, 28 (15). 2405-2415 .

KALAM, MD. ABUL (2003) Exhaust emission and combustion evaluation of coconut oil-powered indirect injection diesel engine. Renewable Energy, 28.

KALAM, MD. ABUL (2002) Biodiesel from palm oil-an analysis of its properties and potential. International Journal of Biomass and Bioenergy, 23 (6). 471-479 .

KALAM, MD. ABUL (2002) Biodiesel from palmoil - an analysis of its properties and potential. Biomass Bioenergy, 23.

KALAM, MD. ABUL (2002) Combustion characteristics of coconut oil in diesel engines. Engineering Transactions of MUT, Thailand, 5. pp. 174-180.

KALAM, MD. ABUL (2002) Use of additive in biofuel to evaluate emissions, engine component wear and lubrication characteristics. of Automobile Engineering (Part D). 751-757 .

KALAM, MD. ABUL (2002) Use of an additive in biofuel to evaluate emissions, engine component wear and lubrication characteristics. Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 216.

KALAM, MD. ABUL (2001) Performance, Emissions and Wear Characteristics of an Indirect Injection Diesel Engine Using Coconut Oil Blended Fuel. Journal of Energy and Environment, 215 (3). 393-404 .

KALAM, MD. ABUL (2001) Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel. Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 215.

KALAM, MD. ABUL (0014) Application of blend fuels in a diesel engine.

KALAM, MD. ABUL (0014) Effect of Additive on Performance of CI Engine Fuelled with Bio Diesel.

KALAM, MD. ABUL (0014) Palm Oil Methyl Ester and Its Emulsions Effect on Lubricant Performance and Engine Components Wear.

Book Section

KALAM, MD. ABUL (2004) Air -Fuel Ratio Calculation for a Natural Gas Fuelled Spark Ignition Engine. In: SAE International (USA). UNSPECIFIED. ISBN 0-7680-1399-2

Other

KALAM, MD. ABUL (2013) Biofuel: policy, standardization and recommendation for sustainable future energy supply. UNSPECIFIED.

KALAM, MD. ABUL (2013) High quality biodiesel as a renewable energy source: Environment aspects and Challenges. UNSPECIFIED.

KALAM, MD. ABUL (2012) Comparative performance analysis of a compression ignition engine fuelled with biodiesel blends. UNSPECIFIED.

KALAM, MD. ABUL (2012) Effect of coconut biodiesel blended fuels on engine performance and emission characteristics. UNSPECIFIED.

KALAM, MD. ABUL (2012) Storage stability of biodiesel. UNSPECIFIED.

KALAM, MD. ABUL (2011) Effect of Additive on Performance of C.I. Engine Fuelled with Bio Diesel. UNSPECIFIED.

KALAM, MD. ABUL (2011) Palm Oil Methyl Ester and It Emulsions Effect on Lubricant Performance and Engine Components Wear. UNSPECIFIED.

KALAM, MD. ABUL (2010) Effectiveness of Combined Additives on Long-term Storage Stability and Fuel Properties of Palm- Biodiesel. UNSPECIFIED.

KALAM, MD. ABUL (2009) Development and Experimental Test of a New Compressed Natural Gas Direct Injection Spark Ignition Engine. UNSPECIFIED.

KALAM, MD. ABUL (2009) Lubricity Study of Waste Cooking Oil as Potential Source of Alternative Fuel for Diesel Engine. UNSPECIFIED.

KALAM, MD. ABUL (2009) Performance and Emissions Characterization of Diesel Engine Running With Re-formulated Palm Oil Methyl Ester-Diesel Blended Fuel. UNSPECIFIED.

KALAM, MD. ABUL (2008) Characterization of Friction and Wear of Waste Vegetable Oil Contaminated Lubricant By Using Four- Ball Machine. UNSPECIFIED.

KALAM, MD. ABUL (2008) High Performance Gas Engine with Direct Injection. UNSPECIFIED.

KALAM, MD. ABUL (2007) Artificial Neural-Network (ANN) Based Modelling of Dual Fuel Internal Combustion Engine Performance. UNSPECIFIED.

KALAM, MD. ABUL (2007) Characterization of carbon deposit from blended palm oil biofuel with additive using thermal and elemental analysis. UNSPECIFIED.

KALAM, MD. ABUL (2007) Development of low cost catalyst to reduce exhaust emission from natural gas engines. UNSPECIFIED.

KALAM, MD. ABUL (2007) Experimental test and simulations of compressed natural gas direct injection (CNGDI) single cylinder engine. UNSPECIFIED.

KALAM, MD. ABUL (2007) Friction and wear characteristics of biodiesel contaminated lubricants. UNSPECIFIED.

KALAM, MD. ABUL (2007) Performance analysis of 1.6L compro engine using Motec and OEM engine control. UNSPECIFIED.

KALAM, MD. ABUL (2007) Recent studies on palm oil diesel and its operating performance on a diesel engine. UNSPECIFIED.

KALAM, MD. ABUL (2007) Study of Exhaust Emission on Turbocharged Diesel Engine Using Response Surface Methodology. UNSPECIFIED.

KALAM, MD. ABUL (2007) Study on wear debris concentration in diesel engine fuelled by biodiesel. UNSPECIFIED.

KALAM, MD. ABUL (2007) The effect of ignition and injection timings on compressed natural gas direct injection (CNGDI) multicylinder engine. UNSPECIFIED.

KALAM, MD. ABUL (2006) Application of artificial neural networks (ANN) in forecasting performance of a duel fuel internal combustion engine. UNSPECIFIED.

KALAM, MD. ABUL (2006) Emission Analysis Of Natural Gas Vehicles (NGV) In Malaysia. UNSPECIFIED.

KALAM, MD. ABUL (2006) Fuel Additive That Cuts Emission and Increases Brake Power in a Small Bio-Fuel Diesel Engine. SAE.

KALAM, MD. ABUL (2006) Lubricant Quality Assessment and Wear of A Biodiesel Fueled Engine. UNSPECIFIED.

KALAM, MD. ABUL (2006) Study on wear debris concentration in diesel engine fuelled by biodiesel. UNSPECIFIED.

KALAM, MD. ABUL (2006) Utilization of Additive Blended Biodiesel in a Diesel Engine. UNSPECIFIED.

KALAM, MD. ABUL (2005) Emissions Characteristics of a Modified CNG Gasoline- Cycle Engine. UNSPECIFIED.

KALAM, MD. ABUL (2005) Emissions and Deposit Characteristics of a small Diesel Engine When Operated on Preheated Crude Palm Oil. UNSPECIFIED.

KALAM, MD. ABUL (2005) Performance and emissions studies of a car engine fueled with gasoline and CNG. UNSPECIFIED.

KALAM, MD. ABUL (2005) Performance, Combustion and Emissions Studies of a New Natural Gas Engine. UNSPECIFIED.

KALAM, MD. ABUL (2005) Study of lubricant viscosity from a diesel engine operating on various percentages of coconut oil blended fuel. UNSPECIFIED.

KALAM, MD. ABUL (2005) The Performance Of A Spark-Ignition Engine Fuelled With Natural Gas And Gasoline. UNSPECIFIED.

KALAM, MD. ABUL (2004) An experimental investigation on conventional NGV engine performance. UNSPECIFIED.

KALAM, MD. ABUL (2004) CO, HC and NOx Emissions Characteristics of a Retrofitted Bi-Fuel Natural Gas Engine. UNSPECIFIED.

KALAM, MD. ABUL (2004) Effect of palm oil methyl ester and its emulsions on lubricant performance and engine component wear. UNSPECIFIED.

KALAM, MD. ABUL (2004) Exhaust Emissions Characteristics of a Retrofitted Bi- Fuel Natural Gas Engine. UNSPECIFIED.

KALAM, MD. ABUL (2004) Exhaust emissions based air-fuel ratio calculation for a natural gas fuelled spark ignition engine. UNSPECIFIED.

KALAM, MD. ABUL (2004) Fuel-Air Equivalence Ratio Calculation From Exhaust Gas Emissions Of A Spark Ignition Engine. UNSPECIFIED.

KALAM, MD. ABUL (2004) Performance and emissions characteristics of a retrofitted bi-fuel spark ignition engine. UNSPECIFIED.

KALAM, MD. ABUL (2004) Prospect of CNG as an Automotive Fuel Instead of Gasoline. UNSPECIFIED.

KALAM, MD. ABUL (2003) Air ¿Fuel Ratio Calculation from Exhaust Gas Emission of a Natural Gas Engine. UNSPECIFIED.

KALAM, MD. ABUL (2003) Engine Test Characteristics for the Development of a New CNG/DI Engine. UNSPECIFIED.

KALAM, MD. ABUL (2003) Engine test cell characteristics for the development of a new natural gas engine. UNSPECIFIED.

KALAM, MD. ABUL (2002) Computer simulation of biofuel injection system for diesel engines. UNSPECIFIED.

KALAM, MD. ABUL (2002) Use of additive in biofuel to improve combustion, emission and lubricant performance characteristics. UNSPECIFIED.

KALAM, MD. ABUL (2001) Biofuel - The Renewable Transport Fuel. UNSPECIFIED.

KALAM, MD. ABUL (2001) Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine component wear. UNSPECIFIED.

KALAM, MD. ABUL (2000) Combustion Characteristics of Biological Fuel In Diesel Engine. UNSPECIFIED.

KALAM, MD. ABUL (2000) Effect Of Biofuel On Environment. UNSPECIFIED.

KALAM, MD. ABUL (2000) Emission and performance evaluation of coconut oil blended fuel. UNSPECIFIED.

KALAM, MD. ABUL (2000) Gasoline Engine Operated On Liquefied Petroleum Gas. UNSPECIFIED.

KALAM, MD. ABUL (2000) Study on Alternative Fuel from Renewable Source for Partial Replacement of Diesel Fuel. UNSPECIFIED.

KALAM, MD. ABUL (2000) Wear and Lubrication Characteristics of a Diesel Engine using Biofuel as an Alternative Fue. UNSPECIFIED.

KALAM, MD. ABUL (1999) Biofuels- The Future Alternative Fuel for Diesel Engine. UNSPECIFIED.

KALAM, MD. ABUL (1999) Combustion and Emission Characteristics of Biological Fuel in Diesel engine. UNSPECIFIED.

KALAM, MD. ABUL (1999) Emission Characteristics of Biofuel in Automobile Diesel Engine. UNSPECIFIED.

KALAM, MD. ABUL (1999) Performance and Exhaust Emission of a Small Diesel Engine using Coconut Oil as Fuel. UNSPECIFIED.

KALAM, MD. ABUL (1999) Polycyclic Aromatic Hydrocarbon and other Emissions from Biofuel Based Alternative Fuels. UNSPECIFIED.

KALAM, MD. ABUL (1998) Influence of Biofuels on Tribological Performance of a Diesel Engine. UNSPECIFIED.

KALAM, MD. ABUL (1998) Performance and Exhaust Emissions of Compression Ignition Engine Fuelled with Coconut Oil and Palm Olein. UNSPECIFIED.

KALAM, MD. ABUL (1997) Exhaust Emissions of C.I Engine Operation on Palm Oil Methyl Esters and its Emulsions. UNSPECIFIED.

This list was generated on Sat Nov 18 01:57:31 2017 MYT.